Roadex is the pioneer in introducing thermoplastic convex marking paint in Pakistan conforming to BS 3262: Part 1/1989 standard. The product is formulated with special material to form raised blocks/ribs after application. These raised ribs/blocks formation provide the safety feature by producing an audio-tactile warning to driver swaying out of their lane along with excellent reflection properties at night in wet conditions.
|Conforming to British Standard (BS) 3262|
|Color Range||White & Yellow|
|Application Temperature||180°C to 200°C|
|Maximum Safe Heating||230°C|
|Softening Point||85°C minimum|
|Loss Factor||5% maximum|
|Skid Resistance (BPN)||55% minimum|
|Flow resistance||2% maximum|
|Gradation of mineral content||RTA T855 Pass|
|Glass bead content||20% (w/w) minimum|
|Abrasion resistance||0.6 g/100 revolutions maximum|
|Flash Point @ °C||230°C minimum|
|Packs available||25 kg|
Ensure that the area where line marking is to be done is clean and free from all dirt, dust, grease, oil, loosely adhered and all other surface contamination. If any mold or fungus is present on the surface, wash it with a commercial bleaching agent and then rinse with clean water. Allow the surface to dry completely before application.
Non-Flammable. Ensure bags are properly stacked and the container is secured in the vehicles for transport.
Do not apply in environment having high humidity, moisture or pending rain possibility. Apply in calm and fine weather conditions. Cease application if weather changes are forecast. Check color with the color chart/standard prior to application. Provide adequate ventilation during use. Apply a test sample for compatibility of this product over a small test area. Keep out of reach of children.